FANDOM


VG1

VG2

VG3

VG4

VK98

Volksgewehr
Country of origin

Germany

Manufacturer(s)

VG1: Walther
VG2: Spreewerk
VG3: Rheinmetall
VG4: Mauser
VG5/VK.98: Steyr

Year(s) designed

Final months of World War II

Weapon type

Bolt-action rifle

Caliber

7.92x57mm, 7.92x33mm Kurz

Action

Bolt-action

Overall length

Various

Barrel length

Various

Weight

Various

Weight empty

Various

Width

Various

Magazine/Cylinder capacity

VG1 and VG2: 10-round detachable box magazines from a Gewehr 43
VG3: 30-round detachable box magazine from a Sturmgewehr 44
VG4 and VG5: 5-round internal magazine, fed with 5 round stripper clips

Cyclic rate

User dependent

Used by

Nazi Germany, Volksturm


The Volksgewehr was a series of five last-ditch rifle designs developed in late 1944 by Nazi Germany.

HistoryEdit

As a last-ditch effort for the nearly lost war, Nazi Germany initiated the Primitiv-Waffen Programm (primitive weapons program), which called for weapons that were easy to produce. Five renowned firearms designers designed each of the five rifles.

Design DetailsEdit

Walther was called on to design the VG1, Spreewerk Berlin the VG2, Rheinmetall the VG3, Mauser the VG4, and Steyr the VG5. The weapons were very crudely and simply made and were easy to mass-produce.

VariantsEdit

VG1

This was the first of five rifles designed for the Volksturm. It was a manually-operated bolt-action rifle and had a simple rotating bolt with two frontal locking lugs. The crudely-made bolt handle also engages a cut in the cast-steel receiver for added safety. It uses ten-round box magazines from a Gewehr 43. It also had a crude manual safety, only consisting of a stamped-steel lever pinned to the trigger guard behind the trigger. When engaged, the safety blocks trigger movement. To disengage, it was simply turned out of the way. The stock was made of wood, and it had crude non-adjustable sights.

VG2

The VG2 was the second of five rifle designs for the Volksturm. It has a similar bolt, stock and safety as the VG1, and even shared the magazine. The sights were zeroed-in at a hundred meters, and was meant for close range shooting only. Around 16,000 to 18,000 are believed to have been produced.

VG3

The VG3 was the third of five rifle designs. It was a bolt-action rifle using the 30-round magazine of the Sturmgewehr 44. Less than 50 are thought to have been produced.

VG4

The VG4 was the fourth of five rifle designs. It was a bolt-action rifle chambered for 7.92x33mm Kurz or 7.92x57mm bullets, fed into an internal magazine by 5-round stripper clips. Less than 10 are believed to have been produced.

VG5

The VG5, or more correctly, the Volksturmkarabiner VK.98, was the final of all five designs. Of all five, the VG5 could be made entirely in small workshops. It was a simplified Karbiner 98k, lacking a butt plate, full-length stock, bayonet lug, or adjustable rear-sight. It also had much simpler sling mounts and a very basic finish. It was possible to add a magazine to the weapon, because it lacked a floorplate; however, it is normally used as a single-shot weapon without a magazine.

TriviaEdit

  • The VG1 was originally supposed to be manufactured by Zbrojovka Brno in the Czech Republic.

ReferencesEdit

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.